|
Application:
UPE-P, the chemical protection hose with an insulating and transparent UPE liner.
Suitable for the transport of acids, alkalis, salts, organic compounds (alcohols, esters, ketones, etc.) incl. aromatic substances, chlorinated hydrocarbons and oxidising acids according to our chemical resistance list.
Resist U has been successfully used for many years in the pharmaceutical and cosmetic industries.
Feature:
The Resist U tube has an extremely low friction coefficient and good abrasion resistance.
Standard/approval:
EN 12115:2011, TRbF 131/2:1992.
Notice:
ATTENTION: The temperature of the medium must be lower than its boiling point.
ATTENTION: Please refer to the Semperit resistance list or, in case of doubt, contact Semperit.
ATTENTION: Continuous use at the peak values reduces the service life.
ATTENTION: To ensure the assembly is leakproof, it must be tested according to EN 12115:2011.
|
|
Temperature range: Tube, depending on the discharge medium up to +100°C, hose, flexible down to -35°C. Steam cleaning, without pressure, up to 130°C / max. 30 min.
Safety factor: 4 : 1
Tube: UPE, transparent, smooth, insulating.
Reinforcement: Special rubber foil, textile, 2 crossed copper wires, zinc plated steel wire helix.
Cover: EPDM, black, electrically conductive, abrasion
resistant, weather resistant, cloth impression.
Marking: Continuous transfer tape, lilac/white:
"SEMPERIT S Resist-U Chemie UPE-P", as well as continuous embossed labelling: "SEMPERIT S EN 12115 UPE-P SD (DN) PN 16 bar M quarter/year TRbF 131/2". |
